Our team will assist you shortly.
Product Attributes
| Type | Description | |
|---|---|---|
| Category | ||
| Import Duty Classification | - | |
| Product Series Line | TDP | |
| IC Encapsulation Type | Tube | |
| Availability Status | Active | |
| Circuit Configuration Style | Isolated | |
| Ohm Value Specification | 1k | |
| Accuracy Tolerance Percentage | ±0.1% | |
| Resistor Component Total | 8 | |
| Resistor Pair Balance | ±0.05% | |
| Ratio Stability Over Time | ±5ppm/°C | |
| IC Pin Total | 16 | |
| Wattage per Component | 100mW | |
| Temp Drift Factor | ±25ppm/°C | |
| Ambient Temp Range | -55°C ~ 125°C | |
| Quality Grade Level | - | |
| Certification Qualification | - | |
| Intended Uses | - | |
| Attachment Mounting Style | Through Hole | |
| Component Housing Style | 16-DIP (0.300", 7.62mm) | |
| Vendor Package Type | 16-DIP | |
| Package Size Specs | 0.755" L x 0.250" W (19.18mm x 6.35mm) | |
| Maximum Mounted Height | 0.190" (4.83mm) |
Description
Utilizes a circuit type categorized as Isolated. Maximum seated height of 0.190" (4.83mm) for components mounted on the board. Mounting style Through Hole for structural integrity. Total pins 16 for connectors or integrated circuits. Total resistors 8 for circuit design. Operating temperature -55°C ~ 125°C for thermal stability. Enclosure Tube for component protection or transport. Enclosure/case 16-DIP (0.300", 7.62mm) providing mechanical and thermal shielding. Enclosure type 16-DIP ensuring device integrity. Energy per unit 100mW for modular system assessment. Product condition Active for availability and lifecycle. Resistance measured in ohms 1k for precise electrical details. Matching ratio of resistors ±0.05% for high-precision circuits. Resistor ratio variation ±5ppm/°C for temperature stability. Product or component classification series TDP. Dimensions 0.755" L x 0.250" W (19.18mm x 6.35mm) for mechanical or electrical components. Dimension measurement 0.755" L x 0.250" W (19.18mm x 6.35mm) for component details. Manufacturer package type 16-DIP for component choice. Coefficient of temperature ±25ppm/°C for stability in performance. Tolerance ±0.1% for precision in manufacturing.