Our team will assist you shortly.
Product Attributes
| Type | Description | |
|---|---|---|
| Category | ||
| Import Duty Classification | - | |
| Product Series Line | HVD | |
| IC Encapsulation Type | Bag | |
| Availability Status | Active | |
| Circuit Configuration Style | Voltage Divider | |
| Ohm Value Specification | 50k, 49.95M | |
| Accuracy Tolerance Percentage | ±0.1% | |
| Resistor Component Total | 2 | |
| Resistor Pair Balance | ±0.05% | |
| Ratio Stability Over Time | ±5ppm/°C | |
| IC Pin Total | 6 | |
| Wattage per Component | 31mW | |
| Temp Drift Factor | ±30ppm/°C | |
| Ambient Temp Range | -40°C ~ 85°C | |
| Quality Grade Level | - | |
| Certification Qualification | - | |
| Intended Uses | Voltage Divider (TCR Matched) | |
| Attachment Mounting Style | Through Hole | |
| Component Housing Style | 15-SIP, 6 Leads | |
| Vendor Package Type | - | |
| Package Size Specs | 1.500" L x 0.110" W (38.10mm x 2.79mm) | |
| Maximum Mounted Height | 0.610" (15.50mm) |
Description
Ideally suited for scenarios involving Voltage Divider (TCR Matched). Utilizes a circuit type categorized as Voltage Divider. Maximum seated height of 0.610" (15.50mm) for components mounted on the board. Mounting style Through Hole for structural integrity. Total pins 6 for connectors or integrated circuits. Total resistors 2 for circuit design. Operating temperature -40°C ~ 85°C for thermal stability. Enclosure Bag for component protection or transport. Enclosure/case 15-SIP, 6 Leads providing mechanical and thermal shielding. Energy per unit 31mW for modular system assessment. Product condition Active for availability and lifecycle. Resistance measured in ohms 50k, 49.95M for precise electrical details. Matching ratio of resistors ±0.05% for high-precision circuits. Resistor ratio variation ±5ppm/°C for temperature stability. Product or component classification series HVD. Dimensions 1.500" L x 0.110" W (38.10mm x 2.79mm) for mechanical or electrical components. Dimension measurement 1.500" L x 0.110" W (38.10mm x 2.79mm) for component details. Coefficient of temperature ±30ppm/°C for stability in performance. Tolerance ±0.1% for precision in manufacturing.
